Start Balancing-Thin-Pro-Volume - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > start balancing-thin-pro-volume

start balancing-thin-pro-volume

This command starts evenly relocating the Thin provisioning volumes (TPVs) among RAID groups.
■
Syntax
start balancing-thin-pro-volume {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example starts balancing TPV01:
CLI> start balancing-thin-po-bolume -volume-name TPV01
This parameter specifies the TPV to start balancing. Only one parameter can be specified. For
details, refer to "1.2.9 Volume Syntax" (page
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
volume_number
| -volume-name
22).
169
volume_name
}
P2X0-1030-09ENZ0