Set Boxid - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > set boxid

set boxid

Box ID is the identification information presented to certain applications. This command sets the Box ID. The
series name, the model name, the serial number, and additional fixed characters of the system are set as the
default for the Box ID.
■ Syntax
set boxid -id
■ Parameter
-id
■ Example(s)
The following example sets the Box ID:
CLI> set boxid -id "00DXL#########ET06F21AUABCPJ000000######"
box_id
This parameter specifies a Box ID. Up to 40 alphanumeric characters, spaces, and hash marks
(#) can be specified. Each Box ID must be unique.
• All alphabetic characters are handled as uppercase.
• The pound key characters (#) are automatically appended when the input characters are
less than 40.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
568
P2X0-1030-09ENZ0