Release Dedicated-Spare - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > release dedicated-spare

release dedicated-spare

This command releases a dedicated hot spare(s). The disk will then have an unassigned (present) status.
■
Syntax
release dedicated-spare -disks
■ Parameter
-disks
■ Example(s)
The following example releases Dedicated Hot Spare #110:
CLI> release dedicated-spare -disks 110
The following example releases Dedicated Hot Spares #110 and #111:
CLI> release dedicated-spare -disks 110,111
disks
This parameter specifies the disks that are registered as Dedicated Hot Spares. One or more
disks can be specified. For details, refer to
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
"1.2.3 Disk Syntax" (page
127
19).
P2X0-1030-09ENZ0