Fujitsu ETERNUS DX80 S2 Cli User's Manual page 639

Disk storage systems
Hide thumbs Also See for ETERNUS DX80 S2:
Table of Contents

Advertisement

Chapter 5 Information Settings and Display
5.3 Maintenance > export log
-divide
-customer-info
-indicator
Example(s)
The following example exports logs to the FTP server named "ftp.a.com" using the Maintenance-use
Ethernet port (MNT port). The user name is "profile1" and the output filename is "/tmp/log":
CLI> export log -port maintenance -server ftp.a.com -user profile1 -filename /tmp/log
Password :
exporting /tmp/log to ftp.a.com
complete.
The following example is the same as above, except that the progress indicator is not displayed:
CLI> export log -port maintenance -server ftp.a.com -user profile1 -filename /tmp/log -indicator disable
Password :
Optional. This parameter specifies the size of files when the logs are divided. If this parameter
is omitted, the default value ("not divided") is applied. When "no" is specified, the log filename
is not changed by the system. Otherwise, an ordered numbering system is used.
no
Not divided.
4mb
Approximately 4MB (4,372,950 bytes)
1mb
Approximately 1MB (1,457,650 bytes)
640kb
640KB (655,360 bytes)
Optional. This parameter specifies whether to include customer information in the exported
logs. If this parameter is omitted, customer information is included in the logs.
enable
Customer information is included in the logs.
disable
Customer information is excluded from the logs.
Optional. This parameter specifies whether the progress indicator is displayed. If omitted, this
function is enabled.
enable
Progress indicator is displayed.
disable
Progress indicator is not displayed.
(Operator inputs password, but it is hidden.)
(Operator inputs password, but it is hidden.)
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
639
P2X0-1030-09ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents