Show Snmp-Trap - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > show snmp-trap

show snmp-trap

This command displays a list of the defined SNMP traps.
■
Syntax
show snmp-trap
■ Parameter
No parameters.
■ Output
# Trap SNMP
# No. Version
# 1 v1
A B
A: Number of the entered SNMP traps.
B: SNMP version. v1/v2c/v3.
C: Manager number.
D: IP Address.
E: SNMP community name. This is not displayed if the version is not v1 or v2c.
F: SNMP user name. This is not displayed if the version is v1 or v2c.
G: Trap sending port number.
■ Example(s)
The following example displays a list of all the defined SNMP trap:
CLI> show snmp-trap
Trap SNMP
No. Version
1 v1
2 v2c
3 v3
Manager IP Community
Number Address Name
1 192.168.100.250 "community1"
C D E
Manager IP Community
Number Address Name
1 192.168.100.250 "community1"
2 192.168.2.1 "community2"
3 10.0.0.1
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
User
Name
"User1"
F
User
Name
"User1"
501
Port
Number
162
G
Port
Number
162
162
162
P2X0-1030-09ENZ0