Format Volume - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > format volume

format volume

This command will format volume(s).
The "format flexible-tier-volume" command is used to format Flexible Tier Volumes (FTVs).
■
Syntax
format volume {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example only formats the volume named "VOL001":
CLI> format volume -volume-name VOL001
The following example formats consecutive volumes #80 - #99 at the same time:
CLI> format volume -volume-number 80-99
volume_numbers
This parameter specifies the volume identifiers to be formatted. One or more RAID groups can
be specified at the same time. For details, refer to
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
volume_names
| -volume-name
"1.2.9 Volume Syntax" (page
162
}
22).
P2X0-1030-09ENZ0