Fujitsu ETERNUS DX80 S2 Cli User's Manual page 337

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-lu-qos
The following example sets the QoS schedule for the LU QoS (for a port with the Host Affinity mode
disabled):
CLI> set host-lu-qos -mode lu-qos -port 000 -lu-qos-group 1 -event-number 1 -schedule-number 5
The following example restores the initial settings of the QoS schedule for the Port QoS:
CLI> set host-lu-qos -mode port-qos -port 000 -event-number 2 -schedule-number ""
337
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0