Mapping (When Affinity Groups Are Used) - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management
3.5.5

Mapping (When Affinity Groups are Used)

This section explains the commands related to the mapping function that are available when Host Affinity
Mode is enabled or LUN groups, port groups, or host groups are used. An affinity group must be defined and
created before commands are used.
272
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0