Fujitsu ETERNUS DX80 S2 Cli User's Manual page 294

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-response
-version
-host-specific-mode
-symmetric
-lun-change Optional. This parameter specifies if the notification is sent when the LUN mapping is
-lun-expand
-vendor-unique-sense
Optional. This parameter specifies the data version of the Inquiry Standard. If omitted, the
existing setting is not changed.
5 The data version is 5th. (default)
4 The data version is 4th.
3 The data version is 3rd.
Optional. This parameter specifies the host specific mode. If omitted, the existing setting is not
changed.
• If the HP-UX mode is selected, up to 1024 mappings can be set.
• If the BS2000 mode is selected, up to 4096 mappings can be set.
• For all other modes, up to 256 mappings can be set.
normal default (default)
aix AIX Mode. Specify this to prevent the command initialization and performance
degradation.
hp-ux HP-UX Mode. Specify this to recognize volumes with more than eight LUs.
linux Linux Mode. Specify this to set up the operation environment for a Linux server.
bs2000 BS2000 Mode
Optional. This parameter specifies the method that is used to access a Logical Unit. If omitted,
the existing setting is not changed.
active ACTIVE/ACTIVE (default value for the ETERNUS DX8700 S2)
passive ACTIVE-ACTIVE/PREFERRED-PATH (default value for the ETERNUS DX80 S2/DX90
S2, ETERNUS DX410 S2/DX440 S2, and ETERNUS DX8100 S2)
changed. If omitted, the existing setting is not changed.
enable Notified
disable Not notified (default)
Optional. This parameter specifies if a notification is sent when the LUN capacity is changed. If
omitted, the existing setting is not changed.
enable Notified
disable Not notified (default)
Optional. This parameter specifies whether to "No Report (Default)" or "Report" the vendor
unique sense code to the host. Vendor Unique Sense indicates the unique sense code for each
vendor that is not coincident with host I/O. If omitted, this parameter is left unchanged.
enable Notified
disable Not notified (default)
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
294
P2X0-1030-09ENZ0