Import Ssh-Public-Key - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.1 User Management > import ssh-public-key

import ssh-public-key

For SSH (Secure SHell) connections, passwords or certificate keys can be used for authentication. This
command is used to import a SSH public key into an ETERNUS DX Disk storage system from an FTP server when
using the certificate key method of authentication.
• One certificate key corresponds to a single user account.
• Even if a specific user account is disabled, a key may still be imported.
The key types that are supported are as follows:
• OpenSSH style RSA for SSH v1 (Strength 1024bit, 2048bit, or 4096bit)
• IETF style DSA for SSH v2 (Strength 1024bit, 2048bit, or 4096bit)
• IETF style RSA for SSH v2 (Strength 1024bit, 2048bit, or 4096bit)
■ Syntax
import ssh-public-key -account-name
-port {maintenance | remote | fst} -server
login_user_account
-user
■ Parameter
-account-name
-port
-server
-user
-filename
-indicator
account_name
filename
-filename
This parameter specifies a user account name used for a certificate key for authentication. Only
one user name can be specified at the same time.
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to "1.11 Note for Specifying FTP Server" (page
maintenance
MNT port
remote RMT port
fst FST port (ETERNUS DX410 S2/DX440 S2 only)
This parameter specifies an FTP server name where the public key is stored. The server name
format is IPv4 standard notation (a base 256 "d.d.d.d" string) or a fully qualified domain name.
Example: -server 192.168.1.20
Example: -server foo.bar
This parameter specifies the user name that is to be used to access the FTP server. When this
parameter is specified, the command displays an FTP server password prompt.
This parameter specifies the name of the file that contains a public key.
Optional. This parameter specifies whether the progress indicator is displayed. If omitted, the
progress indicator is displayed.
enable Progress indicator is displayed.
disable Progress indicator is not displayed.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
server_name
[-indicator {enable | disable}]
31).
369
P2X0-1030-09ENZ0