Create Flexible-Tier-Volume - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > create flexible-tier-volume

create flexible-tier-volume

This command creates a Flexible Tier Volume (FTV) in the specified Flexible Tier Pool (FTRP). Multiple FTVs can
be created in the same FTRP by using the "-count" parameter. This command has the same function as the
"create volume" command, except that an FTV is created in an FTRP.
■ Syntax
create flexible-tier-volume -name
size
-size {tb|gb|mb} [-priority {
[-copy-protection {enable | disable}] [-volume-number
■
Parameter
-name
-ftrp-number
or
-ftrp-name
-size
-priority
-count
-attention
alias_name
ftsp_numbe
This parameter specifies the FTV name. Only one name can be specified. For details, refer to
"1.2.4 Alias Name Syntax" (page
This parameter specifies the FTRP identifier to which the FTV that is to be created is allocated.
For details, refer to "1.2.6 Flexible Tier Pool Syntax" (page
This parameter specifies the FTV size. Select whether terabytes (TB), gigabytes (GB), or
megabytes (MB) are used for the capacity.
Example: 1tb, 120gb, 512mb
Optional. This parameter specifies the FTRP number of the Flexible Tier Sub Pool (FTSP) to
which the FTV that is to be created is preferentially allocated.
If this parameter is omitted or "auto" is specified for this parameter, the allocated FTSP is
determined automatically.
Optional. This parameter specifies the number of FTVs that are to be created. If omitted, only
one FTV is created with the name that is specified by the "-name" parameter.
When two or more is specified for the "-count" parameter, a sequential number starting from 0,
such as 0,1, and 2, is added after the FTV name that is specified by the "-name" parameter.
Example: When "-name abc -count 3" is specified, FTVs "abc0", "abc1", and "abc2" are created. If
these volumes already exist, the names of the created volumes use incrementing index
numbers.
Optional. This parameter specifies the threshold (Caution) for the FTV. A value between 1%
and 200% can be set. If omitted, the default value (10%) is set.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
{-ftrp-number ftrp_number
count
r|auto}] [-count ] [-attention
volume_number
20).
176
| -ftrp-name ftrp_name }
attention
]
]
21).
P2X0-1030-09ENZ0