Show Eco-Mode - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > show eco-mode

show eco-mode

This command displays the current ECO mode status and parameter settings.
■
Syntax
show eco-mode
■ Parameter
No parameters.
■ Output
CLI> show eco-mode
# Mode
A
# Host I/O Monitoring Time
B
# Disk Motor Control Limit Count [5]
C
A: ECO mode
B: The monitoring interval time of the host I/O
C: The number of times that a disk motor will power off and on in one day
■ Example(s)
The following example displays the current ECO mode settings:
CLI> show eco-mode
Mode
Host I/O Monitoring Time
Disk Motor Control Limit Count [5]
[Enable]
[60 min.]
[Enable]
[60 min.]
130
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0