Setting Cancellation; D.3 Setting Cancellation - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Appendix D Basic Setting Examples

D.3 Setting Cancellation

3
Set the relationship between host interface ports 000 and 001, volumes v0, v1, and v2, and
LUNs 0, 1, and 2.
CLI> set mapping -volume-name v0,v1,v2 -lun 0-2 -port 000,001
D.3

Setting Cancellation

This section explains how to cancel the settings that are described in
(page 739).
An outline for canceling settings is shown below.
(1) Canceling mapping
Cancel the set mapping (host affinity) or LUN mapping.
(2) Deleting affinity groups, LUN groups, port groups, host groups, or registered host
- "D.3.2 Deleting Affinity Groups" (page 747)
- "D.3.3 Deleting LUN Groups" (page 748)
- "D.3.4 Deleting Port Groups" (page 748)
- "D.3.5 Deleting Host Groups" (page 748)
- "D.3.6 Deleting Registered Hosts" (page 749)
Delete created affinity groups, LUN groups, port groups, host groups, or registered hosts.
(3) Deleting volumes
Delete created volumes. All mappings associated with the host need to be disabled before deleting
volumes.
(4) Deleting RAID groups
Delete created RAID groups. All the volumes in a RAID group need to be deleted before deleting the RAID
group.
("D.3.1 Canceling Mapping" (page
("D.3.7 Deleting Volumes" (page
("D.3.8 Deleting RAID Groups" (page
746
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
"D.1 Settings When Using Volumes"
747))
749))
749))
End of procedure
P2X0-1030-09ENZ0