Discover Host-Wwn-Names - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > discover host-wwn-names

discover host-wwn-names

This command displays a list of the host World-Wide-Names (WWNs) discovered from the specified FC and
FCoE interface ports.
■ Syntax
discover host-wwn-names [-port {
■ Parameter
-port
■ Output
# 0123456789abcdef (FC-CA)
A
A: Discovered World-Wide-Name
■ Example(s)
The following example displays a list of the host WWNs discovered from all the FC and FCoE interface ports
on CM#0 (FC 4 ports model):
CLI> discover host-wwn-names -port 000,011
CM#0 CA#0 Port#0 (FC-CA)
aabbccddeeff0011
aabbccddeeff0012
ffeeffeeffeeff03
CM#0 CA#1 Port#1 (FCoE)
aabbccddeeff0011
aabbccddeeff0012
ffeeffeeffeeff03
xyz
|all|all-fc|all-fcoe}]
Optional. This parameter specifies the FC and FCoE interface ports to discover host WWN
names. Two or more parameters can be specified by separating them with a comma. If
omitted, all the FC and FCoE interface ports are selected.
Example: -port 000,100
For details, refer to "1.2.14 Host Interface Port Syntax" (page
xyz "x" is the controller module (CM) number, "y" is the CA number, and "z" is the port
number.
Example: 110 (FC port#0 of CA#1 on CM#1)
all All the FC/FCoE interface ports (default)
all-fc All the FC interface ports
all-fcoe All the FCoE interface ports
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
232
25).
P2X0-1030-09ENZ0