Release Reservation - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 5 Information Settings and Display
5.4 Utility > release reservation

release reservation

This command releases the volumes that have been reserved by host servers (persistent reservation). The
reservation key is also deleted.
■ Syntax
release reservation {-volume-number
■ Parameter
-volume-number
or
-volume-name
■
Example(s)
The following example releases the volume named "VOL001" that has been reserved by the host servers:
CLI > release reservation -volume-name VOL001
identifiers #5-#25 that have been reserved by the host servers:
CLI > release reservation -volume-number 5-25
volume_numbers
This parameter specifies the volume identifiers to be released. One or more volumes can be
specified at the same time. For details, refer to
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
| -volume-name
"1.2.9 Volume Syntax" (page
676
volume_names
}
22).
P2X0-1030-09ENZ0