Show Host-Sense - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-sense

show host-sense

This command displays a list of the host responses and the associated sense code conversion information.
Only preset information can be shown.
■ Syntax
show host-sense
{-host-response-number
■ Parameter
-host-response-number
or
-host-response-name
■ Output
# Host Response
# No. Name
# 6 fj0006
A B
A: Host response number
B: Host response name
C: Host sense number
D: Original sense key
E: Original sense code (Additional sense code)
F: Original sub sense code (Additional sense code qualifier)
G: Converted sense key
H: Converted sense code (Additional sense code)
I: Converted sub sense code (Additional sense code qualifier)
J: Preset function name
■ Example(s)
The following example displays the host responses and associated sense conversions:
CLI> show host-sense -host-response-number 1,2
Host Response
No. Name
1 fj0001
2 fj0002
host_response_numbers
This parameter specifies the host response identifiers whose entries are to be displayed. One
or more host response identifiers can be specified at the same time. For details, refer to
Host Response Syntax" (page
Sense Original
No. Sense Code Sense Code
1 04/**/**
C D E F
Sense Original
No. Sense Code Sense Code
1 04/**/**
1 03/**/**
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
| -host-response-name
24).
Converted
06/**/** (Linux)
G H I J
Converted
06/**/** (Linux)
04/**/** (Windows)
303
host_response_names }
"1.2.12
P2X0-1030-09ENZ0