Fujitsu ETERNUS DX80 S2 Cli User's Manual page 687

Chapter 6 CLI Original Function
6.1 CLI Environment > help
The following example shows when "create" (the verb section or first part of the CLI command name) is
specified as the command parameter for the help command. Brief descriptions of all the command names
beginning with the word "create" are output:
CLI> help create
create affinity-group
create community-profile - Create a SNMP community profile.
create eco-schedule
create host-wwn-name
create raid-group
create snmp-view
create ssl-certificate
SSL.
create user
create volume
The following example displays a detailed description of the "create raid-group" command:
CLI> help create raid-group
Descriptions:
Create a RAID group with the specified RAID group name, RAID level and disks.
Syntax:
create raid-group -name alias_name -disks disks -level {0|1|5|6|10|50} [-assigned-cm {0|1|auto}]
Parameter description(s):
-name
Name of a RAID group
-disks
Disk drives to use in the RAID group
-level
RAID level
0
1
5
6
10 : RAID1+0
50 : RAID5+0
-assigned-cm
Assigned controller for the RAID group
0
1
auto : Automatically (default)
- Create an affinity group.
- Create one ECO schedule and only one ECO schedule event.
- Create a host identifier and alias for an FC host port.
- Create a RAID group with the specified RAID group name, RAID level and disks.
- Create an SNMP Management Information Base view (MIB view).
- Re-create a server key and a server certificate for network security using SSH/
- A new user name of profile
- Create one or more volumes on a specified RAID group.
: RAID0
: RAID1
: RAID5
: RAID6
: Controller Module #0
: Controller Module #1
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
687
P2X0-1030-09ENZ0