Set Ais-Connect-Remote-Session - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > set ais-connect-remote-session

set ais-connect-remote-session

This command permits remote sessions to remotely control the ETERNUS DX Disk storage system from a
remote server by using the AIS Connect function.
This command cannot be used when the AIS Connect function is disabled.
■ Syntax
set ais-connect-remote-session -session {permit|forbid} [-timeout
■ Parameter
-session
-timeout
■
Example(s)
The following example allows connection from the AIS Connect server and sets two hours as the timeout
interval:
CLI> set ais-connect-remote-session -session permit -timeout 2
This parameter specifies whether remote sessions are permitted to remotely control the ETER-
NUS DX Disk storage system from the AIS Connect server. When connections of remote sessions
are permitted with this option, the setting is automatically reversed if the AIS Connect server
does not request remote sessions within the period that is specified for the "-timeout" option.
permit Connections for remote sessions are permitted.
forbid Connections for remote sessions are not permitted.
Optional, but must be specified when "permit" is specified for the "-session" parameter. This
parameter specifies the idle timeout interval for remote sessions. If the AIS Connect server
does not request remote sessions within the specified period, the setting that permits
connections of remote sessions is automatically reversed. This time period can be specified on
an hourly basis by using a number from 0 to 24. If "0" is specified, a timeout does not occur
(the idle timeout interval is unlimited).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
timeout
549
]
P2X0-1030-09ENZ0