Fujitsu ETERNUS DX80 S2 Cli User's Manual page 285

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set mapping
■ Example(s)
The following example sets the relationship between host interface port #0 on CM#0 CA#1, the volume
named "VOL001", and LUN #1:
CLI> set mapping
The following example sets the relationship between host interface port #0 and #1 on CM#0 CA#0, the
volume named "VOL002", and LUN #2:
CLI> set mapping
(identical with the following)
CLI> set mapping -port 000 -volume-name VOL002 -lun 2
CLI> set mapping -port 001 -volume-name VOL002 -lun 2
The following example sets the relationship between host interface port #0 on CM#0 CA#0, volumes #0 - #9,
and LUNs #0 – #9:
CLI> set mapping
-port 010 -volume-name VOL001 -lun 1
-port 000,001 -volume-name VOL002 -lun 2
-port 000 -volume-number 0-9 -lun 0-9
285
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0