Set Clienv-Force-Unlock - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 6 CLI Original Function
6.1 CLI Environment > set clienv-force-unlock

set clienv-force-unlock

Multiple sessions may compete for exclusive resources. One session can execute commands, but commands
issued by the other session(s) are abnormally terminated with an error message. In this case, wait for the
session to complete processing, and then retry the failed command. Or, use this command to forcibly release
exclusive resources. This is useful when access is lost due to unexpected errors, such as a terminal
disconnecting suddenly. This command forcibly releases resources on which CLI and RAID controller firmware
have an exclusive hold.
Do not use this command while settings are being performed by another session of Web GUI, CLI, or
monitoring software
■ Syntax
set clienv-force-unlock
■
Parameter
No parameters.
■ Example(s)
The following example forcibly releases exclusive resources:
CLI> set clienv-force-unlock
683
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0