Delete Snmp-Manager - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > delete snmp-manager

delete snmp-manager

This command deletes the SNMP manager settings.
This command is not available when the SNMP manager setting that is to be deleted is already used for an
SNMP community, an SNMP user, or an SNMP trap.
■ Syntax
delete snmp-manager -manager-number
■ Parameter
-manager-number
■ Example(s)
The following example deletes the #4 SNMP manager setting:
CLI> show snmp-manager
No. IP address
1 10.0.0.1
2 172.20.235.1
3 192.168.0.21
4 172.20.235.1
5 192.168.10.11
6 192.168.0.254
CLI> delete snmp-manager -manager-number 4
CLI> show snmp-manager
No. IP address
1 10.0.0.1
2 172.20.235.1
3 192.168.0.21
5 192.168.10.11
6 192.168.0.254
This parameter specifies the SNMP manager settings to delete. One or more numbers can be
specified by using "," or "-".
Example:
-manager-number 1,2,4
-manager-number 6-9
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
manager-numbers
474
P2X0-1030-09ENZ0