Show Disks - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 2 Status Display
2.1 Storage System Status > show disks

show disks

This command displays the details and status of the disk. As an option, an enclosure (all disks contained in
the specified enclosure), specific disks, or all the undefined disks can be specified.
■ Syntax
show disks [ -type {undefined | ce | de -de
■ Parameter
-type
-de
-disks
■ Output
For summary, the following items are displayed.
Location
Status
Size
Type
Speed
Usage
Optional. This parameter specifies which disk information will be displayed. This parameter
cannot be specified with the "-disks" parameter. If all of the parameters are omitted, all disks
registered in the system will be displayed. undefined
undefined All the undefined disks
ce All disks in the controller enclosure (only for the ETERNUS DX80 S2/DX90 S2)
de All disks in the specified drive enclosure
When using this parameter, the "-de" parameter and the drive enclosure number
must also be specified.
Optional. This parameter specifies the number of the drive enclosure for which details are to be
obtained. This parameter cannot be used for other category types.
Optional. This parameter specifies which disk number to display the detailed information of
the disk for. One or more parameters can be specified. For details, refer to
(page 19) Specifying "all" will display the details of all disks. When using the "productid"
parameter, the product ID list of all disks is displayed. This function is useful when updating
disk firmware.
all Details of all disks
productid The Product ID list of all disks
Disk slot number
Disk status
Disk capacity
Disk type
Rotating speed (unit: rpm)
Disk usage
Example: Data, Spare, System, etc.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
enclosure_number
} | -disks {
64
disks
| all | productid} ]
"1.2.3 Disk Syntax"
P2X0-1030-09ENZ0