Enabling/Disabling Pen Up Move; Enabling/Disabling The Media Sensors; Enabling/Disabling The Home Sensors; Circle-Command Resolution Setting (When The Command Setting Is Hp-Gl) - GRAPHTEC CE5000-60 User Manual

■ Enabling/Disabling PEN UP MOVE

This function sets whether the pen will travel to each point specified or only from the initially specified point
to the last specified point when consecutive commands are received specifying pen movement while it is
raised.
When ENABLED is selected, the pen travels consecutively to each coordinate specified by the data
received.
When DISABLED is selected, the pen travels directly from the initially specified point to the last specified
point.
(The default setting is DISABLED.)

■ Enabling/Disabling the Media Sensors

This function sets the media sensors that detect the size of the medium in the feed direction.
When ENABLED is selected, the feed-direction media sensors are enabled.
When DISABLED is selected, the feed-direction media sensors are disabled.
(The default setting is ENABLED.)

■ Enabling/Disabling the Home Sensors

This function sets the home sensors that detect the width of the medium.
When ENABLED is selected, the home sensors are enabled.
When DISABLED is selected, the home sensors are disabled.
(The default setting is ENABLED.)

■ Circle-Command Resolution Setting (when the COMMAND setting is HP-GL)

This function sets whether the resolution is automatically set or fixed at a constant 5 degrees when a cut-
ting-plotter circle command is output while the COMMAND setting is HP-GL.
(The default setting is Auto.)

■ Enabling/Disabling Blade Wear Detection

When ENABLED is selected, the blade wear-detection setting is enabled and the blade wear-detection set-
ting menu is displayed in the PAUSE menu.
When DISABLED is selected, the blade wear-detection setting is disabled, and the blade wear-detection
setting menu is removed from the PAUSE menu and is not displayed. For details on wear detection, refer to
see "4.19 Blade Wear Detection."
(The default setting is DISABLED.)

■ Setting up the PAUSE KEY

Select the screen to be displayed when you press the (PAUSE) key while cutting or plotting.
If you select HOLD, the cutting plotter stops cutting or plotting and displays a job select screen prompting
you to choose to continue or stop cutting/plotting.
If you select MENU, the cutting plotter stops cutting or plotting and displays a pause menu screen.
(Default value: MENU)

■ Setting up the COPY MENU

Set the location in the Pause menu at which you want the "COPY" menu to be displayed.
If you select "STD" (for standard), the Copy menu is displayed on the 14th page of the Pause menu.
If you select "TOP," the Copy menu is displayed on the 1st page of the Pause menu.
(Default value: STD)
5 – 3