Replacing A Cutter Blade - GRAPHTEC FC4200-50 User Manual

2.3 Replacing a Cutter Blade

Procedure
Blade length adjustment dial (red)
Plunger
φ
(for 1.5-mm blade)
(1) Turn the blade length adjustment dial to retract the blade inside the plunger.
(2) Turn the plunger cap in the counter-clockwise direction to unscrew it from the plunger.
(3) Remove the blade inside the plunger cap.
(4) Take a new blade and insert it into the opening in the plunger cap.
(5) With the blade inserted into the plunger cap, attach the plunger from above.
φ
1.5-mm
cutter blade
φ
Plunger cap for 1.5-mm blade
Blade length adjustment dial (blue)
Plunger
φ
(for 0.9-mm blade)
φ
0.9-mm
cutter blade
Plunger cap for 0.9-mm blade
2 – 3
Spring
φ