Replacing Cutter Blade - GRAPHTEC CE7000-130AP User Manual

12.2

Replacing Cutter Blade

Replace the cutter blade by referring to the structure diagram of the cutter pen.
CAUTION
To avoid bodily injury, handle cutter blades with care.
PHP33-CB09N-HS/
PHP33-CB15N-HS
Hole
Operation
1
Turn the blade-length adjustment knob in the direction of the
B arrow and pull the blade into the plunger.
PHP33-CB09N-HS/PHP33-CB15N-HS
One scale unit
approximately 0.1 mm
2
Turn the plunger cap in the counter-clockwise direction to
remove it from the plunger.
3
Remove the blade from inside the plunger cap.
4
Take a new blade out of its pack. Insert the new blade into
the hole provided in the plunger cap.
5
Insert the blade into the plunger cap and attach the plunger
from above in that state.
Blade-length adjustment knob
Plunger
Cutter blade
φ 0.9mm / φ1.5mm
Plunger-cap
(Blue)/(Red)
Scale
Scale
12-3