Setting Feed Speed for Pre Feed
Automatic pre feed when cut data is received and the speed of media for pre feed in initial feed are set
Set the feed speed to "SLOW" if the media shifts during the pre feed if the media is heavy or slippery. It is
normally set to "NORMAL".
"Pre Feed of Media (Paper or Marking Film)"
"Perform Automatic Pre Feed When Media is Set (Initial Feed)"
"Perform Automatic Pre Feed When Cut Data is Received"
Setting for the FEED SPEED for pre feed is maintained even if the power is turned off.
Press the [MENU] key.
MENU screen is displayed.
Press the  key (MEDIA).
MEDiA SETT iNg screen (1/2) is displayed.
Press the POSITION (¡å ) key.
MEDiA SETT iNg screen (2/2) is displayed.
Press the  key (FEED SPEED).
FEED SPEED setting screen is displayed.