Setting Feed Speed For Pre Feed - GRAPHTEC CE7000 Series User Manual

8.4

Setting Feed Speed for Pre Feed

Set the speed of media transfer during the feed (media carry) of auto media transfer of received cut data, leveling
of the initial feed etc.
Set the feed speed to "SLOW" if the media shifts during the pre feed if the media is heavy or slippery. It is normally
set to "NORMAL".
•
"Pre Feed of Media (Paper or Marking Film)"
•
"Perform Automatic Pre Feed When Media is Set (Initial Feed)"
•
"Perform Automatic Pre Feed When Cut Data is Received"
Supplement
This setting will be saved even if the power is shut off.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/2) is displayed.
3
Press the POSITION ( ) key.
MEDIA SETTING screen (2/2) is displayed.
4
Press the [1] key (FEED SPEED).
FEED SPEED screen is displayed.
Supplement
Perform the settings in Normal mode.
8-7