Table of Contents
Advertisement
Setting the Speed
Set the speed of the tool that is used in each of the condition numbers.
Setting range:
1 to 10 (1 cm/s step), 10 to 60 (5 cm/s step)
Operation
1
CUT CONDITION & TEST screen is displayed.
2
Press the POSITION (
CONDITION (The selected item is highlighted.). Then, press
Cond No. selection screen is displayed.
3
Press the POSITION (
4
Press the POSITION (
setting value.
5
Setting will be set, and it will return to CUT CONDITION & TEST screen.
6
It will return to READY screen.
) keys to select the CUT
) keys to select the SPEED.
) keys to increase or decrease the
2-62
Supplement
Settable range is 1 to 10 (1 step)
15 ·· (5 steps) ··60 (cm/s)
Advertisement
Table of Contents
