Download Print this page

GRAPHTEC FC8000 Series User Manual: Adjusting The Sensor Level

Cutting pro.
Hide thumbs

Advertisement

Adjusting the Sensor Level

level (threshold value between the media background color and registration mark) of the sensor scanning
Scan
the registration mark is automatically adjusted.
Sensor is adjusted to scan the registration mark written in black lines on white background. Readjust the scan
level of the sensor depending on the color and gloss of the media.
If it is hard to adjust the level automatically due to media surface characteristics, adjust the scan level of the
sensor manually.
Operation
Load the media with level adjustment pattern in the plotter.
1
Level adjustment pattern
Press the [MENU] key.
2
MENU screen is displayed.
Press the [2] key (ARMS).
3
ARMS SETTINGscreen (1/4) is displayed.
Press the POSITION (¡å ) key twice.
4
ARMS SETTINGscreen (3/4) is displayed.
Press the [2] key (SENSOR ADJUST).
5
SENSORADJUST screen is displayed.
Next page
X
Y
5-18
Supplement
See "Loading Media (Paper or Marking Film)"
l
P .2-6
for setting the media.
Use the media that will be used with a line
l
with width of the registration mark written in
registration mark color for the level adjustment
pattern.
POSITION
Supplement
It will return to ARMS setting screen (3/4) without
changing the settings when you press the
POSITION (? ) key (CANCEL).

Advertisement

Troubleshooting

   Also See for GRAPHTEC FC8000 Series

   Related Manuals for GRAPHTEC FC8000 Series

Comments to this Manuals

Symbols: 0
Latest comments:
  • vincent cirillo Apr 28, 2016 12:49:
    HOW TO CHANGE CENTIMETER MEASURING UNITS TO INCHES MEASURING UNITS ON A GRAPHTEC FC 8000 SERIES PLOTTER