Adjusting The Sensor Level - GRAPHTEC FC8000 SERIES User Manual

Adjusting the Sensor Level

Scan level (threshold value between the media background color and registration mark) of the sensor scanning
the registration mark is automatically adjusted.
Sensor is adjusted to scan the registration mark written in black lines on white background. Readjust the scan
level of the sensor depending on the color and gloss of the media.
If it is hard to adjust the level automatically due to media surface characteristics, adjust the scan level of the
sensor manually.
Operation
1
Load the media with level adjustment pattern in the plotter.
Level adjustment pattern
2
Press the [MENU] key.
MENU screen is displayed.
3
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
4
Press the POSITION (▼) key twice.
ARMS SETTING screen (3/4) is displayed.
5
Press the [2] key (SENSOR ADJUST).
SENSOR ADJUST screen is displayed.
Next page
X
Y
5-18
Supplement
See "Loading Media (Paper or Marking Film)"
●
P.2-6 for setting the media.
Use the media that will be used with a line
●
with width of the registration mark written in
registration mark color for the level adjustment
pattern.
POSITION
Supplement
It will return to ARMS setting screen (3/4) without
changing the settings when you press the
POSITION (◄) key (CANCEL).