Security Application Delete Port - Ericsson HM4x0 Reference Manual

Security CLI Commands
19.57

security application delete port

19.57.1 Syntax
security application <application> delete port <number>
19.57.2 Description
This command deletes the protocol, port and trigger configuration previously
added to a security application using the security application add
port command.
19.57.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
application
number
19.57.4 Example
--> security application quake2 delete port 1
604
Description
The <shortname> that identifies an
existing security application. To
display security application names,
use the security list
applications command.
The port ID number for the existing
port configuration. To display port ID
numbers, use the security
application list ports
command.
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005