Bridge Clear Fwdallinterfaces Independent - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.48

bridge clear fwdallinterfaces independent

4.48.1 Syntax
bridge clear fwdallinterfaces independent
{<vlanname>|<vlannumber>}
4.48.2 Description
This command removes all the interfaces from the egress interface list of the
Forward All Group of the named VLAN. The Forward All Group represents the
set of interfaces to which all the multicast frames would be forwarded.
4.48.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
vlanname
vlannumber
4.48.4 Example
--> bridge clear fwdallinterfaces independent VLAN_1
90
Description
A name of an existing VLAN. See
the bridge add vlan command
to configure a new VLAN.
A number that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
The number appears in the first
column under the heading ID.
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005