Pppoe Set Transport Remoteip - Ericsson HM4x0 Reference Manual

17.38

pppoe set transport remoteip

17.38.1 Syntax
pppoe set transport {<name>|<number>} remoteip <ip-
address>
17.38.2 Description
This command sets the IP address supplied to the remote end of the PPP
connection during negotiation. This is particularly important for PPP dialin
transports.
17.38.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
ip-address
17.38.4 Example
--> pppoe set transport pppoe1 remoteip 192.168.103.2
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
PPPoE transport. To display transport
names, use the pppoe list
transports command.
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the pppoe list
transports command.
The IP address of the remote 'server-
end' of an interface displayed in the
following format:
192.168.102.3
PPPoE CLI Commands
Default value
N/A
N/A
0.0.0.0
495