Ip Set Rip Authentication - Ericsson HM4x0 Reference Manual

12.30

ip set rip authentication

12.30.1 Syntax
ip set rip authentication {enabled|disabled}
12.30.2 Description
This command enables/disables RIP v2 plain text authentication.
If enabled, a plain text authentication string is placed in RIP v2 packets. RIP
v2 packets will only be accepted if they contain an authentication entry with
the correct password string. Packets with no authentication or the wrong
password will be rejected.
To set an authentication password, use the ip set rip password
command.
12.30.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
enabled
disabled
12.30.4 Example
--> ip set rip authentication enabled
2/1553-ZAT 759 94 Uen B – December 2005
Description
Accepts RIP v2 packets that contain
an authentication entry with the correct
password string. Packets with no
authentication or the wrong password
are rejected.
Rejects RIP v2 packets containing an
authentication entry.
IP CLI Commands
Default value
disabled
287