Security Enable|Disable Ids Blacklist - Ericsson HM4x0 Reference Manual

Security CLI Commands
19.33

security enable|disable IDS blacklist

19.33.1 Syntax
security {enable|disable} IDS blacklist
19.33.2 Description
This command enables support for the IDS (Intrusion Detection Service)
blacklist. Blacklisting denies an external host access to the system if IDS has
detected an intrusion from that host. Access to the network is denied for ten
minutes.
Note:
19.33.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
enable
disable
19.33.4 Example
--> security enable IDS blacklist
578
This CLI command is case-sensitive. You must type the command
attributes exactly as they appear in the syntax section of this page. If
you do not use the same case-sensitive syntax, the command fails
and the CLI displays a syntax error message.
Description
Enables blacklisting of an external
host if IDS has detected an intrusion
from that host.
Disables blacklisting of an external
host if IDS has detected an intrusion
from that host.
Default value
enable
2/1553-ZAT 759 94 Uen B – December 2005