Dhcpclient Set Interfaceconfig Clientid - Ericsson HM4x0 Reference Manual

DHCP Client CLI Commands
5.17

dhcpclient set interfaceconfig clientid

5.17.1 Syntax
dhcpclient set interfaceconfig {<name>|<number>} clientid
<clientid>
5.17.2 Description
This sets a unique client identifier that DHCP server uses to identify the client.
5.17.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
clientid
5.17.4 Example
--> dhcpclient set interfaceconfig config1 clientid
00:11:22:33:44:5a
130
Description
A name that identifies an existing
DHCP client interface. To display
client interface names, use the
dhcpclient list
interfaceconfigs command.
A number that identifies an existing
DHCP client interface. To display
client interface numbers, use the
dhcpclient list
interfaceconfigs command.
A unique identifier that DHCP server
can use to identify the client. For
Microsoft DHCP servers, the client
ID should be the MAC address of
the card that DHCP is running on.
For other DHCP servers, the client
ID can be a MAC address or a text
string such as the hostname.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005