Table of Contents
Advertisement
19.47
security show IDS
19.47.1
Syntax
security show IDS
19.47.2
Description
This command displays the following information about IDS settings:
•
•
•
•
•
•
•
•
•
Note:
19.47.3
Example
--> security show IDS
Firewall IDS:
Victim Protection Block Duration: 800
2/1553-ZAT 759 94 Uen B – December 2005
IDS enabled status (true or false).
Blacklist status (true or false).
Use Victim Protection status (true or false).
DOS attack block duration (in seconds).
Scan attack block duration (in seconds).
Victim protection block duration (in seconds).
Maximum TCP open handshaking count allowed (per second)
Maximum ping count allowed (per second).
Maximum ICMP count allowed (per second).
This CLI command is case-sensitive. You must type the command
attributes exactly as they appear in the syntax section of this page. If
you do not use the same case-sensitive syntax, the command fails
and the CLI displays a syntax error message.
Use Blacklist: true
Use Victim Protection: true
Dos Attack Block Duration: 3600
Scan Attack Block Duration: 43200
Max TCP Open Handshaking Count: 150
Max PING Count: 25
Max ICMP Count: 200
IDS Enabled: true
Security CLI Commands
593
Advertisement
Table of Contents
