Bridge Add Fwdallinterface Shared - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.56

bridge add fwdallinterface shared

4.56.1 Syntax
bridge add fwdallinterface shared {<fdbname>|<fdbnumber>}
<interfacename>
4.56.2 Description
This command adds an interface to the egress interface list of the Forward All
Group of the named Filtering Database. The Forward All Group represents the
set of interfaces to which all the multicast frames would be forwarded.
4.56.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
fdbname
fdbnumber
interface
name
4.56.4 Example
--> bridge add fwdallinterface shared FDB_1 bridge1
98
Description
The name of an existing Filtering
Database. See the bridge add
vlan command to configure a new
Filtering Database.
A number that identifies an existing
Filtering Database. To display the
list of statically configured FDBs,
use the bridge list fdbs
command. The number appears in
the first column under the heading
ID.
The name of a bridge interface that
has previously been added and
attached to a transport using the
bridge add interface and
bridge attach commands.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005