Ericsson HM4x0 Reference Manual page 356

NAT CLI Commands
Option
portno
2ndportno
localportno
2ndlocal
portno
14.12.4 Example
The example below forwards TCP port 80 to 90 requests on the WAN
interface to 10.10.10.10 ports 8080 to 8090. Note that the first range must be
the same size as the second range.
--> nat add resvmap rm2 interfacename WAN 10.10.10.10
tcp 80 90 8080 8090
356
Description
Either a single TCP or UDP port
number that you want to use in your
reserved mapping configuration, or
the first port number in the range of
ports.
The second TCP or UDP port
number in the range that started
with the port specified in portno.
Either a single internal TCP or UDP
port number or the first port number
in the range of external ports.
The second internal TCP or UDP
port number in the range of external
ports to be used if you have
specified a localportno.
Default value
N/A
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005