Table of Contents
Advertisement
RFC1483 CLI Commands
18.14
rfc1483 set transport rxvci
18.14.1
Syntax
rfc1483 set transport {<name>|<number>} rxvci <vci>
18.14.2
Description
This command sets the receive Virtual Circuit Identifier channel. If you later set
the VCI using the rfc1483 set transport vci command, the RX VCI
setting will be overridden.
The port/VCI/VPI combination must be unique for each transport.
18.14.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
rxvci
18.14.4
Example
--> rfc1483 set transport my1483 rxvci 700
530
Description
A name that identifies an existing
RFC1483 transport. To display
transport names, use the rfc1483
list transports command.
A number that identifies an existing
RFC1483 transport. To display
transport numbers, use the rfc1483
list transports command.
Part of the ATM header. The RXVCI is
a tag that identifies which channel a
cell will be received over. The RXVCI
can be any value between 1 and
65535.
Default value
N/A
N/A
VCI value set
when the transport
was created using
the rfc1483 add
transport
command.
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
