Snmp Cli Commands; Summary - Ericsson HM4x0 Reference Manual

20

SNMP CLI Commands

This chapter describes the SNMP CLI commands.
20.1

Summary

The table below lists the SNMP commands provided by the CLI:
snmp add communityname
snmp set communityname
snmp add trapdestination
snmp set trapdestination
snmp set config syscontact
snmp set config syslocation
snmp set config authentraps
snmp show config
snmp list disabledtraps
snmp set coldstartdelay
snmp set ipaddress
2/1553-ZAT 759 94 Uen B – December 2005
snmp delete communityname
snmp list communitynames
snmp delete trapdestination
snmp list trapdestinations
snmp set config sysdescr
snmp set config sysname
snmp set config snmpautosave
snmp disable enable|disable trap
snmp send trap
snmp show coldstartdelay
snmp show ipaddress
SNMP CLI Commands
607