Table of Contents
Advertisement
RFC1483 CLI Commands
18.7
rfc1483 set transport mbs
18.7.1
Syntax
rfc1483 set transport {<name>|<number>} mbs <max burst
size>
18.7.2
Description
This command sets the maximum burst size (mbs) for an existing RFC1483
transport that performs dialout over PVC.
This command is only valid if you set VBR or VBR RT as the QoS Class using
the rfc1483 set transport qosclass command.
18.7.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
maximum
burst size
18.7.4
Example
--> rfc1483 set transport my1483 mbs 10
522
Description
A name that identifies an existing
RFC1483 transport. To display
transport names, use the rfc1483
list transports command.
A number that identifies an existing
RFC1483 transport. To display
transport numbers, use the rfc1483
list transports command.
Controls the maximum burst size for
VBR (Variable Bit Rage) and VBR RT
(VBR Real Time) channels. This value
overrides an existing BT value (if set).
The MBS can be any value between 0
and 100.
Default value
N/A
N/A
0
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
