Dhcpserver Set Bootp - Ericsson HM4x0 Reference Manual

DHCP Server CLI Commands
6.18

dhcpserver set bootp

6.18.1 Syntax
dhcpserver set bootp {enabled|disabled}
6.18.2 Description
This command determines whether or not DHCP server can respond to
BOOTP requests.
6.18.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
enabled
disabled
6.18.4 Example
--> dhcpserver set bootp disabled
168
Description
DHCP server responds to BOOTP
queries.
DHCP server does not respond to
BOOTP queries.
Default value
enabled
2/1553-ZAT 759 94 Uen B – December 2005