Bridge Set Interface Pvid - Ericsson HM4x0 Reference Manual

4.33

bridge set interface pvid

4.33.1 Syntax
bridge show fdb {<fdbname>|<fdbnumber>}
4.33.2 Description
This command specifies the VLAN Id, that should be assigned to untagged or
priority-tagged frames received on this interface.
Note:
4.33.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
pvid
4.33.4 Example
--> bridge set interface bridge1 pvid 2
2/1553-ZAT 759 94 Uen B – December 2005
The pvid for an interface can be set to <pvid> only if the VLAN with
Vlan-Id as <pvid> is already configured and the interface exists in the
egress interface list of the VLAN.
Description
A name that identifies an existing
bridge interface. To display interface
names, use the bridge list
interfaces command.
A number that identifies an existing
bridge interface. To display interface
numbers, use the bridge list
interfaces command. The
number appears in the first column
under the heading ID.
The Id of the VLAN to which the
user wants to associate the
untagged/priority-tagged frames
received on the given interface. See
the bridge list vlans
command to find the VLAN Ids for all
the statically configured and
dynamic VLANs.
Bridge CLI Commands
Default value
N/A
N/A
1
73