Logger Set Facility - Ericsson HM4x0 Reference Manual

Logger CLI Commands
13.2

logger set facility

13.2.1 Syntax
logger set facility <facility>
13.2.2 Description
This command sets the facility code used for a syslog call. The facility code
represents a syslog call of a certain type, for example, facility code 0
represents kernel messages, facility code 1 represents user-level messages
and so on.
The facility codes comply with those documented in RFC 3164.
13.2.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
facility
13.2.4 Example
--> logger set facility 5
334
Description
A numerically coded facility value as
defined in
atmos/source/syslog/syslog.h.
Default value
0
(no facility set)
2/1553-ZAT 759 94 Uen B – December 2005