Pppoe Set Transport Discoverdns Secondary - Ericsson HM4x0 Reference Manual

PPPoE CLI Commands
17.14

pppoe set transport discoverdns secondary

17.14.1 Syntax
pppoe set transport {<name>|<number>} discoverdns
secondary {enabled|disabled}
17.14.2 Description
Note:
This command enables/disables whether the secondary DNS server address
is requested from a remote PPP peer using IPCP. The default setting for this
command is enabled. The default setting for the pppoe set transport
givedns commands is also enabled.
17.14.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
enabled
disabled
17.14.4 Example
--> pppoe set transport pppoe3 discoverdns secondary
enabled
466
You must enable one of the pppoe set transport givedns
commands in order for this command setting to work.
Description
A name that identifies an existing
PPPoE transport. To display transport
names, use the pppoe list
transports command.
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the pppoe list
transports command.
A secondary DNS server IP address is
requested.
A secondary DNS server IP address is
not requested.
Default value
N/A
N/A
enabled
2/1553-ZAT 759 94 Uen B – December 2005