Table of Contents
Advertisement
10.14
firewall list validators
10.14.1
Syntax
firewall list validators <policyname>
10.14.2
Description
This command lists the following information about validators added to a
policy using the firewall add validator command:
•
•
•
•
•
10.14.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
policyname
10.14.4
Example
--> firewall list validators ext-int
Firewall Host Validators:
ID | Name | Direction | Host IP
-------------------------------------------------------------
2 | v1
1 | v2
-------------------------------------------------------------
2/1553-ZAT 759 94 Uen B – December 2005
Validator ID number.
Validator name.
Direction (inbound, outbound or both).
Host IP address.
Host mask address.
Description
A name that identifies a firewall policy.
To display policy names, use the
firewall list policies
command.
| both
| inbound
| Mask
| 192.168.103.2 | 255.255.255.0
| 192.168.103.1 | 255.255.255.0
Firewall CLI Commands
Default value
N/A
241
Advertisement
Table of Contents
