Table of Contents
Advertisement
16.41
pppoa set transport subnetmask
16.41.1
Syntax
pppoa set transport {<name>|<number>} subnetmask <mask>
16.41.2
Description
This command sets the subnet mask used for the local IP interface connected
to the PPP transport. If the value 0.0.0.0 is supplied, the netmask will be
calculated from the class of the IP address obtained during IPCP negotiation.
16.41.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
mask
16.41.4
Example
--> pppoa set transport pppoa1 subnetmask 255.255.255.0
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
The subnet mask used by the local IP
interface connected to the PPP
transport.
PPPoA CLI Commands
Default value
N/A
N/A
0.0.0.0
433
Advertisement
Table of Contents
