Security Set Trigger Secondaryendport - Ericsson HM4x0 Reference Manual

Security CLI Commands
19.27

security set trigger secondaryendport

19.27.1 Syntax
security set trigger <name> secondaryendport <portnumber>
19.27.2 Description
This command sets the end of the secondary port number range for an
existing trigger. It allows you to restrict the ports that a trigger will open,
however, this is not usually necessary.
19.27.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
portnumber
19.27.4 Example
--> security set trigger t3 secondaryendport 1933
570
Description
A name that identifies an existing
trigger. To display trigger names, use
the security list triggers
command.
Sets the end of the trigger's secondary
port range.
Default value
N/A
65535
2/1553-ZAT 759 94 Uen B – December 2005