Bridge Clear Interface Stats - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.6

bridge clear interface stats

4.6.1 Syntax
bridge clear interface stats {<name>|<number>}
4.6.2 Description
This command clears either the interface statistics for all interfaces or the
interface statistics for a single specified interface. It resets all of the statistical
information displayed by the bridge list interfacestats command to
zero.
4.6.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
4.6.4 Example
--> bridge clear interface stats
--> bridge clear interface stats LanInterface
38
Description
The name of an already added and
attached bridge interface. See
bridge add interface and
bridge attach commands to add
a bridge interface and attach it to a
transport, respectively.
A number that identifies an existing
bridge interface. To display interface
numbers, use the bridge list
interfaces command. The
number appears in the first column
under the heading ID.
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005